Category Archives: Film

Perception – Short Film

I have finally, finally, got round to finishing an old project that started way back in May 2012. It’s my latest short film and I hope you enjoy it.

This is going to be quite a long post, and before I show you the film (provided you haven’t already seen it), I thought it would be worth explaining a few things. There are also some things that I’m going to tell you after you’ve seen the film, to avoid spoiling things.

So way back in May I’d just finished helping some older friends from my school (around 18, at the time I think). It was a one-day, 15-16-hour shoot all over west and slightly further west London, using a Sony FS100 and professional audio equipment owned by the school. I was 14 at the time and had not had that much fun making a film in ages.

Unfortunately, they were about to leave our secondary school, St. Paul’s, to go off to college or wherever, and I was in my first year. There is nearly nobody in the 3 years in between us who is interested in filmmaking, and nobody actively doing anything about it.

So, it looked like that was going to be the most of filmmaking fun I would have for quite a while, until I was in the top years and was trusted with the best camera out of the school grounds.

And so I set about rectifying the situation. Because I was the only one of my friends who was actively interested in making a film, it looked like I was going to have to write, direct and shoot it, and cast some of my friends appropriately and get some on the crew.

I finished the first draft of Perception on the 2nd May. Over the next two weeks, I asked friends and family to look over it, do iron out the details and get it polished. I’m not going to pretend that I’m great at writing scripts, especially under time pressure as I knew we would have to have shot the whole film by the end of June. And what’s more – the film would have a £0 budget.

So what came out of it was not a great script, but something to keep us going. Perhaps at this stage of my career, the goal is not to make a great film, but to learn a lot along the way and make mistakes that you’ll know not to make again.

And maybe, along with the fun that we had, that was what happened with this production. It’s not as good as I would have liked it to be, but we have to live realistically, and so I think it best to stop trying to improve this project more that is really possible, and to move onto the next, with fresh ideas and new perspectives.

And so, without further a-do, here is the completed short. Please go and watch in Vimeo, and if you want to support me and my friends in our future work, consider ‘tipping’ this film with the amount you think appropriate. The money will go towards new gear to help us improve and learn and make more awesome things.

Now that you’ve seen it, you might want to know a little more about how this was made.

After I’d got the script completed, I asked my good friend Henry Dyer to help me produce the film. We set about creating a locations list: we were going to need to shoot in school, in a cinema, and on the street both during the day and after dark. However, the catch was that we’d have to have access to electricity in the place we’d shoot the final fight scene.

First of all, we emailed the local cinemas to see whether or not they’d consider allowing us to shoot in their lobby for free. I’d deliberately left out any scenes inside the cinema screen itself, as it would be much harder to get access and very unlikely without having to pay anything. Initially, we contacted Cineworld Hammersmith because it was the cinema that looked the most like what I had in my head:

cineworld

But they didn’t respond in the ~6 weeks we had before we needed to be actually needed to be shooting. Around a week or so after we asked them, we also contacted the good people at the Electric Cinema, who were willing to let us borrow their lobby for around two hours for free. Unfortunately, when Henry went round there to see how we could film, it became apparent that it would be impossible for us to shoot the shots we had planned and that were critical to the plot. Also, around half an hour after Henry left, it caught fire. So that was a no-go.

Henry had one last cinema up his sleeve, and that was the Curzon Cinema in Richmond. They were great and said that we could have the lobby for as long as we wanted as long as it was during opening hours and that we weren’t disturbing any performances. So we arranged to shoot there on the morning of Sunday 1st July.

We decided to do the shooting of the fight scene outside my house, as it would mean that we could get access to food, drink and most importantly power for the lights without buying a generator and catering services, and the other “walking scenes” as we referred to them, could be shot on the high street near my house.

Getting permission to film in school is always difficult, mainly because of excessive health and safety regulations, however it was made possible and a lot easier thanks to David Smith and Oliver Rokison, who helped us out a lot and got things organised, and supervised us after school.

Then we had to decide what gear to use. Initially, we had thought that we might be able to shoot using the school’s FS100, but we would need to be supervised at all times to do that, and it turned out to be impractical. So we shot it on my 600D.

I had always been interested in Steadicam, especially having been the operator on the previous film I mentioned above, and I decided it would be the best way to film the walking scenes. Luckily, our school’s Art department had a Steadicam Merlin that we could borrow and use out of school, so we went for that. We borrowed a heavy duty tripod for the static shots, as it was by far the best tripod we had access to, and although it was quite heavy, it has a great fluid head. And finally, we were lucky enough to borrow some a set of three ARRI 600′s with barn doors, gels and stands. All of the lights in one bag with their paraphernalia were definitely the heaviest equipment we used – I estimate 12-15kgs, although we never bothered to weigh it. Many sore shoulders were had after carrying that monstrosity around. But it allowed us to shoot well into the night and have a decent light source with good colour, which is always a huge plus. Many thanks to Alan Newton from SPS Art for lending us the equipment and getting it all signed off for.

In terms of lenses, we used my Canon 50mm f/1.4 for most of the tripod shots, and my Sigma 20-40mm f/2.8 @20mm for all of the fight scene shots, and the other tripod shots. I used my 18-55m f/4-5.6 kit lens for the Steadicam shots, because it weighs next to nothing and has image stabilisation built in, which helped to get rid some of the jitters caused when flying the Merlin without the arm and vest.

Then, for sound, we looked to the school’s Drama department. They have a RØDE NTG-2 with a Marantz PMD661 and a boom pole, and we got Nathan, who regularly does technical theatre (backstage, lighting, etc.) with me and Henry in the Drama department, to record the audio for us. Again thanks to Edward Williams, head of Drama at SPS, for authorising us to borrow equipment, and to Dan Staniforth for putting up with our unreasonable requests and unlocking the cupboards and getting us the forms to sign.

Casting was difficult. In Year 9, it’s hard to find people who take you seriously when you say you’re making a film. But I also have a great friend, Amos Jackson, who agreed to act, who knew Ella, who also agreed.  Hugo was an old friend, and agreed to help me out, and Henry knew and persuaded Hilton to play the lead.

Scheduling is hardSo hard in fact, that we didn’t know which roles anyone other than Hilton and Ella would be playing until 4 days before we started shooting. Nobody could be in the right place at the right time or stay long enough. Somehow though, we managed. And that’s one of the main difficulties about making a truly independent film – you haven’t got a governing body, like a film school or film course or something to take care of scheduling for you and so you have to do all of that yourself.

So then the first day of shooting arrived. It was near the end of the summer term, and the holidays were just around the corner. It was the 15th June, and we shot the walking scene of Ella and Hilton, as well as the first half of the fight scene. I was intending to finish it that night, but that was going to be impossible as it was 9:30pm Hilton had to leave early and everyone had to get home, so I had to organize the second part of the scene to be shot later.

I used a cold hair light, with a diffused orange backlight and key. That gave us some nice areas of shadow, that I could use to my advantage with the thugs.

IMG_8417

The next shoot was the school scenes, and we did those on Tuesday 26th. The first bit was shot in our sports center, and I would have loved to do one of my long introductions with music and text, but I forgot to shoot a static locked-down shot and didn’t have time to come back later.

I didn’t have any proper storyboards, none that weren’t in my head, so I told the actors to perform the sequence of the turning corner and the mini-discussion with the friend and I filmed it from several angles to see which one looked best, and I’m quite happy with what came out of it. We put two of the 600W ARRIs at one end of the passage, bouncing off the ceiling, to fill out the shadows a bit.

Then we moved up to the computer gallery. The challenging part with this room was that the whole wall on the right was reflective, meaning that anything we had behind the camera would also be in front of the camera if we weren’t careful. The tracking shot to the right as Hilton walks to his computer unfortunately included the reflections of Hugo holding a clapperboard, Nathan holding the boom pole, and one of the lights on its stand. It was too good to cut however, so I marked it down as needing some serious work in post.

This slideshow requires JavaScript.

The actual Facebook conversation on the screen wasn’t filmed until this month, basically down to a lack of time because of other projects I’d been working on, and Christmas.

The last day of shooting was the day after school ended, the 1st of July. We had scheduled to film in and outside the Curzon in Richmond from about 10 in the morning. We arrived early so we could shoot the scene outside the cinema first. This scene was going to have to look like night, so we used a reflector to cancel out as many of the shadows as we could, so that I could colour grade later to make it look like night.

IMG_1291

Unfortunately, nobody was there to open the cinema when the time came for us to shoot, so we waited. Then Iesh Thapar, one of the employees of the Curzon, who also makes short films, arrived, and it turned out that he also thought the cinema was going to open at around 10, but in reality it wasn’t going to happen until the first screening at around 11:30.

So Nathan and Theo went round the corner to see if Tesco was open, but it was shut until 11. Eventually they found that Sainsbury’s in Richmond Station was open, and picked up as much as they could carry.

I was quite worried at this point because the window for us to get our shots inside the cinema was closing, but luckily when Steve Forman, the manager arrived, he apologised and said we could shoot during one of the screenings.

Even more luckily for us, the screening was of a four-hour opera with an interval, so we had two hours to get in, set up, shoot and pack up before we started interrupting the paying audience. And with the help of Iesh, we managed with 20 minutes to spare.

For the most part, Nathan was standing on one of the tables to get the audio we needed, unless that would have been in frame, and in that case he went under the counter of the bar.

soundman

I have to thank Iesh for the help he gave us, and without him the mirror shot at the beginning of the interior scene would never have happened. He also helped as a clapper loader, which really helped to speed up proceedings.

I had scheduled the scenes that we didn’t finish on the 15th for that evening, so many some of the cast and crew came home with me to spend the day, and others went off and returned later.

That evening, at around 6pm, we started setting up the fight scene outside my house to look as much like the previous shoot as possible. But, to my dismay, the bulb of one of the three lights that we were going to use for the outside scenes blew, leaving us with only a two-light setup, which causes awkward shadows and overexposed areas. Luckily, I had two LED Par cans that were roughly half as bright as one of the ARRIs each, so I could get a match to what I had had previously.

The middle one stopped working

The middle one stopped working

At around 7pm, we were all ready to shoot except for one person – Simran, who plays the lead, had had a minor family emergency and didn’t arrive until 8pm, having lost an hour of shooting time. It would have been fair to say I was fairly stressed at this point.

When Simran finally did arrive, we managed to get the remainder of the fight scene choreographed (yes that’s right – we hadn’t even had time to choreograph it properly yet) and shot it fairly quickly. Here’s an interesting fact – the noise Amos (Slide) makes when being punched in the stomach was not a sound effect, it was a real live recording of him falling to the ground.

The light was fading fast, and most of the cast headed off home, except for the three thugs, because we still had to shoot their walking scene. It was around 10pm and people still had to get home, but we managed to get six takes of it. We must have been quite a sight – three thugs walking forwards with me walking backwards with a Steadicam and Nathan walking backwards holding a 3 meter boom pole trying not to get in the shot. And, right in front of us all, Henry, who walked into the road to make sure we weren’t going to get run over while crossing the road and not looking. Unfortunately we didn’t get a picture of that – we were all to concerned with getting the footage.

In the end, I’m very happy with the footage we got from that, and although the audio was not excellent, it was the best we could to with the equipment we had in the time we had. Maybe that’s the most anyone can ever do in situations like that.

And that was the end of principal photography. “A wrap”. A relief.

And then, on to editing. Here’s a brief screenlapse (I just made that term up but I quite like it) of the first stages of editing.

Editing Perception from Alex Forey on Vimeo.

I edit my films in Adobe Premiere Pro and do VFX in After Effects, by right-clicking a clip in the timeline and choosing “Replace with After Effects Composition”. This allows me to edit things in AE and have them automatically update in my timeline, so when I export that timeline, the whole movie is exported in one go.

I used Magic Bullet Looks for colour correction and grading, and it’s the best piece of software I’ve come across for grading in the timeline. It’s fairly lightweight, but can occasionally go completely buggy on you, so you have to restart Premiere to fix it.

I also recorded some foley sound effects to supplement the live sound. Here is my setup:

IMG_0475

It’s not ideal, and I don’t have a dedicated audio recorder so I record the sound into the camera, but it works. It’s on its side so that I can get the microphone close to the keyboard and so I can see the monitor through the camera, making it easier to sync up later.

The timeline itself was in 1920×1080, but I put a 2.35:1 (the aspect ratio that most films use) letterbox over the top as a guide to how to position things, as I would later export in that aspect ratio.

Between starting editing and finishing, I created a rough cut for the cast, crew and original composers of our score (who sadly got bogged down with work and were unable to complete it), and a second cut more recently for Henry so he could see how things were going.

Here’s what the finished timeline looked like:

timeline

Another perk of the post production job is that I got to make the fake Facebook accounts. We had initially created some when we shot the scene in the computer gallery, but had forgotten the passwords, so when it came round to shooting the chat windows, I had to make some more. Here is my desk with Jason’s Facebook on the left, mine in the middle, and Abbey’s on the right.

IMG_0474

Both of them were friends with the cast and crew in real life, to make them more realistic. I roped in my sister to type on the other end of the chat while I filmed Jason’s side. I used an old HP monitor, which isn’t pictured above, because it was the closest I could find to the monitors we used at school.

Once I’d done that, I dropped it into the timeline and we were about ready to go. I did a final audio pass, in which I went through and corrected some wonky levels (Premiere lets you do it while playing back the timeline, without pausing) and I deemed it ready to “ship”. I put the Cinematic Mob intro on the beginning and the ident on the end, and exported it in 1920×816, which is roughly 2.35:1.

My specific settings were: H.264, 15mpbs, Level 5.1, 23.976fps, VBR 2-pass encoding with AAC 320kbps audio. The film, at 7 minutes and 37 seconds took 1 hour and 36 minutes to render on a 2010 iMac with quad-core i3 and 16GB of RAM, which isn’t too bad considering all the grading and stabilisation I used.

One really cool thing that the whole Premiere Pro / Media Encoder suite can do for you is automatically upload your finished file over FTP, and it can even send the local file to the trash if you want it to. I used this to upload them to my home server, so that I could share it with Henry and a few others for review.

Playing back the final product I realised that I’d entered someone’s name twice for the same thing in the credits, so I edited the Photoshop file, hit ‘reload footage’ in After Effects, and then rendered Premiere sequence out again using the same settings as before in Media Encoder, this time overnight.

And, after uploading to Vimeo, that was that.

Before I go I’d just like to say a huge thank you to everyone involved, including the cast, crew, everyone at the Curzon and at St Paul’s for making this possible, and especially to my long-suffering parents, who had noisy children making a loud film outside their house until 10pm on two separate nights.

As I said before, it’s not perfect, far from it, but it was a great experience – I had a lot of fun, learnt a lot of things, and made some new good friends. Now, what’s next?

Transport for London: Timelapse

First of all, it’s timelapse, not time-lapse or time lapse. I don’t care about your opinion of this matter. And with that, I can move on.

So I had decided a while ago that although my previous timelapses (this one, this one, this one, and more recently this one) were interesting, I would like to make something to showcase London, which is, in my opinion (which, let’s face it, is the only one that matters here), the greatest city on Earth.

I wanted to do something that showcased what an awesome (in the literal sense of the word) city London really is. I originally intended to concentrate just on the tube, but after reading pages and pages and discussions and discussions and discussions and discussions and posts and worrying, I eventually realized that was not going to be entirely possible, so I shifted from just the Tube to Transport in London in general, knowing that there would be more opportunity for footage.

I’d abide by the official rules, no tripods or flash, and go and set up anyway. If I was stopped then meh, I’d move onto the next station, and if not well that’s fine then. Another rule that I felt abliged to follow (although in reality is completely useless) was the rule that you’re “not allowed to take photos in stations if you spend more than 15 minutes there”. This was basically their definition of the difference between taking photos as you pass through, like so many tourists do; and setting out to a station to take photos, not ride the tube.

Another thing I had to plan beforehand was the music. This was basically a no-brainer, because the music had to be CC-licenced, yet also be awesome. I came across this track while watching this video, and after searching around a bit I found out he was happy to let me use his music. It also had a certain flow to it that I couldn’t find anywhere else, so that was that.

I then went about planning my shots. Here’s an early previs of what I thought it was going to turn out like, but in the end I ended up editing what I had, then planning in my head what footage I needed to fill the gaps in the song.

And so with that, I went out to get my footage. I went to Piccadilly Circus (the place and the Tube Station), the Mall, Hammersmith, Windsor, Earl’s Court, Trafalgar Square and Turnham Green station, over the course of about a month, in around 5 trips. At the end of each trip I’d bring back the footage, process it with Media Encoder CS5, put it into Premiere CS5.5, match up the footage to the appropriate part of the film, wrote down the length of the gaps and what kind of subject would fit that part in the music, and go out again.

During my last shoot, which was (funilly enough) the last shots of the film (traffic at night around the Hammersmith Flyover), a construction van pulled up to just behind where I was filming. Two guys got out and went over to the part of the flyover that had roadworks on it, and I assumed they were just checking that everything was in order. A few minutes later I turn round to see them both watching me. They were slightly perplexed as to what the hell I was doing with an expensive camera on a tripod in the cold and dark by myself. I turned round and pretended to ignore them. But a few seconds later one of them was standing next to me and asked me what I was doing. It wasn’t an accusatory “What are you doing?”, it was “Watcha doo-ing?” kinda thing. I explained to him how timelapse works, and he seemed to catch on fairly quickly. A few minutes later he and his friend had jumped into their van and gone speeding off.

Similarly at Piccadilly Circus, a few young Germans came up to me and complemented me on my gear – it was the 600D with 20-40mm, a VideoMic and an LCDVF, all on a tripod. They themselves both had 5D mkIIs and I was slightly miffed. They already knew what timelapse was. I should keep business cards on me more often for this kind of stuff.

While standing in the cold/rain/wind(/sun?!), the only thing I could really do was play with my phone, and to that effect I did what I like doing most with my phone – taking photos. Here’s a slideshow of all the photos I took while standing around. My favourite is a photo of a Star Wars battle that unfolded next to me during the first shot of Piccadilly Circus.

Oh, and after all of that, I guess you want to watch the end product. Here it is.

Interesting fact before you watch: the first shot was actually a mistake – I had Gorillapodded my very back-heavy DSLR to a railing that was very close to some glass (hence the crap on the lens in those shots in Earl’s Court), and started the timelapse, only to realize a minute later that my camera was pointed at the ceiling. This resulted in a rather interesting (and slow) camera move that I thought started the video well.

I’ll shut up now.

Oh, and one last thing. If you’re wondering what the hell was happening in Trafalgar Square, it was a live re-enactment of the crucifixion, because it was Good Friday, or something. And that’s a CCTV camera you can see spinning in the top left hand corner. And the London Eye spun backwards for a bit, nothing wrong with my footage.

Transport for London from Alex Forey on Vimeo.

What do you think?

Alex.

Oh, and one last thing. There is a reason there’s a wait before the video begins. Two, actually. First being that players like Vimeo and YouTube generally have some sort of overlay, I want the user to be able to have already gotten rid of it before the content starts, and secondly that I want you to be really focused on the screen before the video starts, because it helps you pick up the sense of rhythm faster (I think).

KODAK!! Y U NO DIGITAL??

The End of Kodak

KODAK!! Y U NO DIGITAL??

I was sad to hear that Kodak has recently gone bankrupt. I was sad for several reasons, but mainly as I see Kodak as being one of the main symbols of film (or analogue) photography.

(The other, by the way, is that whenever I go to Jessops to develop my film, they would give me a free Kodak film, so I would never actually have to buy any film at all; although I can imagine they’ll just swap over to another brand.)

The reason that I think Kodak went under, is that they decided that they did not want to dip into the digital world. I think this was a big mistake.

Although Kodak made some of the first digital cameras, but they were only compact cameras. They never stepped up to the DSLR market, like Pentax did. Pentax make some of the highest megapixel DSLRs on the market.

I don’t know why they decided that DSLRs were not the thing for them, but they also stopped making compact cameras. I am puzzled that they did not jump on the bandwagon of the new EVIL cameras, but I suppose it was because they decided that digital was not for them.

I feel this marks the end of an era, although to be honest I haven’t been around all that long. I love taking film photos, they have an aesthetic that can never be matched by digital straight out of the camera, but this is not a good reason for Kodak to refuse to do digital completely.

I would be interested to see if anybody can come up with any other reasons that Kodak refused to make digital cameras; if you do, drop a comment so other people can expand on this article.

A depressed Alex, signing off.

DIY DSLR Cage, Matte Box and Rail System for £25

Hello, peoples of teh internets. I have made an awesome (I say so myself) DIY DSLR Cage and 15mm Rail System. Now, if you’re a n00b at cameras, a brief explanation of what these things are.

A DSLR cage serves two purposes, to enable mounting of multiple accessories, such as a monitor, an LED video light or a microphone; and also to protect the DSLR if it were to fall off a tripod or be dropped.

A rail system allows mounting of other types of accessories along the length of camera and lens, such as a matte box, follow focus, or shoulder mount. So the bottom line is, this allows me to:

  1. Attach a whole lot of stuff to my camera without breaking it’s hot shoe or using a ridiculous hot should extension arm thing
  2. Look more professional
The “looking more professional” is more important than you might think. It’s not just a case of ego-factor, but also the general public respects you more as a filmmaker doing a serious job when your gear looks extensive. You may have a whole tonne of skill, but the public can’t see that – you have to fully “display your colours” in order to make them respect you and therefore not try to intentionally ruin shots by walking by in a particularly inappropriate manner or looking straight into the camera lens etc.
So, now you know why I have made one, I expect you probably want to know what it looks like. Expansive Instagram photo album:
I will now break it up into several sections: the cage, the matte box, and the rail system.
The cage was made entirely out of overpriced goods from B&Q (the feeble excuse for Home Depot in the UK). Parts list:
  • 4x 20cm length of Black 20mm Ø Black PVC Pipe (found on the end of the electric section)
  • 4x 25cm length Square C-shaped aluminium bracket (found in the hardware section amongst all the other randomly arranged tall pieces of metal)
  • 4x 27cm length of 4mm threaded rod (doesn’t have to be 4mm, just a sturdy number between 3 and 6 to keep down the weight) (found next to the above item, although placing may vary depending on shop)
  • 2x M4x25mm length bolts (or same as your threaded rod)
  • 10x M4 (or the same as your threaded rod) nuts
  • Random piece of wood or metal, measuring 9cm by 20cm
  • 4x large diameter 25mm bolt, countersink head
  • 4x nuts to fit those bolts
  • 10cm of pine wood thing measuring around 2cm x 2.5cm (same as listed below)
For rail mounts on cage
  • 2x 12cm of pine wood thing measuring around 2cm x 2.5cm (large enough to drill 16mm holes in without it splitting)
  • 4x M3 x 25mm bolts (exact)
  • 2x random scraps around 1cm x 4cm x 0.75cm
TOOLS – these tools are not exact. You may be surprised by the amount of different sized drill bits mentioned here, but we (as a family) have a set of 100 useful bits and tools for a good price of around £30 - http://image.auction.co.kr/itemimage/538/43/09/53843096.jpg
  • 4mm metal drill bit (same as threaded rod, etc.)
  • 6mm metal drill bit (same as beefy bolts)
  • 2mm wood drill bit (exact)
  • 5mm wood drill bit (exact)
  • 16mm wood drill bit (exact)
  • 4mm plastic drill bit (same as threaded rod, etc.)
  • Junior / Senior hack saw
  • Pencil, ruler… etc.
  • Wood glue
  • Screwdriver of all sorts to fit bolts
  • AND A MASSIVE DRILL
Stuff you don’t need but I had so it made it easier
  • S7 Flat head screwdriver bit
  • S4 Flat head screwdriver bit
  • PH2 Philips head screwdriver bit
  • 7mm bolt head grip thing bit (Diameter of threaded rod + 3mm)
  • Black and Decker Workmate or some kind of proper vice
Then arrange it so threaded rod goes through PVC to reinforce it, then through C-shaped metal on both sides followed by a nut on each end to secure it, like this (this photo is sideways)
Then, make two frames in a square shape, with PVC uprights and metal top and bottom. Then drill an M4 hole in the middle of the top metal bracket on both frames, cut another length of PVC pipe 20cm long, put holes in that and then bolt it to the top. Be careful with those bolts and nuts – you’ll use them when holding the camera by the handle – very important when having around £1000 of gear on it as well. It should now look like this (ignore the wood bit at the bottom for now)

Then, line up the piece of wood you cut and then cut holes in both the wood and the two metal horizontals.

Nearly there. One last thing and then we’ll get onto the rail mounts. Take another 10cm-ish of the pine wood and drill 3x 5mm holes in it in a line. These will act as tripod mounts for the cage. There are three so you can move to cage backwards or forwards on the tripod to counterbalance the weight of the camera, lens and matte box. Then wood glue that to the underside of the cage in a suitable position. This is why in the photo the cage appears to be hovering off the ground. Then take a tripod plate and carefully screw it into the three holes, so it creates it’s own thread inside the wood.

Building the Rail Mounts

These are very important in this rig. Don’t mess them up. You’ll need to make 4 of these – two for the cage, one for the matte box and one for the camera. If you feel really creative you can make more for a DIY follow focus or something. That’s the point of a rail system – it’s expandable.
So for each one  you need to do this. Take 12 cm of that pine wood. Take the bigger face and measure 3cm in for each end. Then drill one 16mm hole on each place you marked. This is where the rails go through. Then put the piece on it’s end and drill a 2mm hole straight down from the end until it breaks the wall of the 16mm hole. This will be where the bolts go in to stop the mount moving up and down the rail.
Take two of the 3mm bolts and carefully screw them into the 2mm holes so they create their  own thread, much like the tripod mount in the previous section.
Once you have made 4 of these, take two of them and wood glue the two random scraps to the bottom of each one, then wood glue those to the cage in a suitable position, to allow access with a screwdriver to the bolts on each end.
Now take one more and drill a 5mm hole in the bottom of it. This will be the mount for the camera, and the hole is to allow mounting of the rails onto a tripod without the cage system, as seen in the earlier photo. Again, take a tripod plate and screw it into the hole to create a thread.

The Rails Themselves

These are basically just two 9″ lengths of the 15mm dowel. That’s it. If you can find metal, do that, but I couldn’t so wood will do.

 The Matte Box

A rather ingenious design, even if I do say so myself. It’s made out of an old VHS case, which means it folds flat when you don’t need it. First things first, rip off the plastic that covers both sides of it – we won’t be needing that.

Then  find two random pieces of plastic (not metal – it’s too heavy), measuring about 15cm x the length of the short side of the case.

Use much tape to secure them to each side of the open case and act as a hinge. Make sure it opens and closes without falling off. These act as the side flags. Then take some more tape (I prefer blue electrical tape – it looks more awesome) and Run it all the way around the edge of the case. This stops the lid from hinging in two places – only one in order to keep it less likely to move.

Then cut a hole in the back of the case for the lens to look through. It’s going to be around 10mm in diameter larger then the filter size of your largest lens. I did this with a Stanley knife.

Lastly, take your last mounting block and screw it to the bottom of your matte box to allow mounting on rails. For me it was already the perfect height for my DSLR, but you might need to add some more height between the mount and the matte box.

Have Fun

And that was pretty much it. If I’ve forgotten to make anything clear, drop a comment. Have fun with your new kit, but remember – it’s not the gear that makes a movie, it’s creativity. Without a good story, good acting and a good idea, all this is useless.

Alex, signing off.